Skip to content
EIC
Contact

For cement, steel and mixed biogases

CO₂ Capture & Liquefaction

Economically capture carbon from flue gas with as low as 15% CO₂. Valorize the offtake to cover capex. Compress and liquefy CO₂ economically and with less equipment risk.

Lower

cost of CO₂ capture, approaching $40 per tonne

modeled

Combine

compression and segregation

Avoid

two-phase complications

Every figure here is measured or modeled at the conditions stated. Your mission will differ — we model your case before anyone commits to anything.

The problem

Carbon capture is usually described as a chemistry problem, but at industrial scale it is largely a compression problem. Once CO₂ has been separated from a flue gas stream, it has to be compressed and cooled into a liquid before it can be transported, used or stored. That compression is energy-intensive enough that it eats into the plant’s output — the well-known “energy penalty” that makes operators reluctant to install capture at all.

For hard-to-abate industries — cement, steel, refining, thermal generation — this is the difference between a capture project that pencils out and one that does not.

What EIC does differently

The liquid piston platform performs the compression step near-isothermally, so far less of the plant’s energy is spent in this process . Efficient compression makes pressure based absorption and release practical at low carbon concentrations and can take the extracted gas right to liquefied product.

What that changes

A cheaper path to liquid CO₂ changes the economics on both sides of the ledger. On the cost side, the capture energy penalty shrinks. On the revenue side, liquid CO₂ is a commodity with existing buyers — beverage carbonation, greenhouses, industrial processes, enhanced recovery, and a growing market in permanent sequestration and CO₂-to-products.

An emissions stream that was purely a compliance liability becomes something a plant can transport and sell.

Deployment

The platform is designed to integrate with commercially available Balance of Plant equipment and to be adopted with minimal disruption to existing operations — which matters when the host facility is a running cement kiln or power station that cannot be taken offline for a lengthy retrofit.

Resources

Written for engineers and developers evaluating this application. We ask who you are before sending the file.

Request the document

Tell us where to send it

We send the file straight away. We use these details to answer questions about it and to follow up if you ask us to — see the privacy notice.

* required