For food processors, data centers
HVAC & Refrigeration
Cut compression and cooling energy in food storage and data centers
30–40%
efficiency increase for R-744 systems
modeled
Higher
flexibility for R-744 systems in hot climates
Avoid
ultra high impact refrigerant chemicals
Every figure here is measured or modeled at the conditions stated. Your mission will differ — we model your case before anyone commits to anything.
The problem
Most decarbonization conversations are about building something new. But the largest near-term reduction available to many industrial operators is in equipment they already own. Compression and cooling are everywhere in industry — chillers, refrigeration, air systems, process gas handling — and in aggregate they represent an enormous, continuously running electrical load.
That equipment is also mechanically complex. Conventional compressors have many moving parts, which means maintenance windows, spare inventory and unplanned downtime.
What EIC does differently
The liquid piston platform applies near-isothermal compression to this everyday duty. Across gases, pressures and flow rates our modeling shows a 20–30% reduction in compression energy against conventional machines for the pressures and flow rates typical of industrial HVAC and process cooling . The saving comes from never letting the heat build up in the first place, rather than removing it afterwards. This works especially well for carbon dioxide based refrigeration that operates at higher pressures and is considered a ‘natural’ refrigerant. Combined with energy recovery on the expansion side, efficiency is high and the system can work in hot climates.
The liquid piston architecture also removes many of the precision parts found in a conventional compressor. Fewer parts in motion means fewer wear surfaces, longer service intervals and better uptime — which for a plant running continuously is often worth as much as the energy saving itself.
Where it applies
- Large commercial and industrial HVAC and chiller plant
- Industrial refrigeration and cold chain
- Datacenter waterless cooling
Adoption path
Because the platform works with standard Balance of Plant equipment, operators can plug it into existing operations with minimal disruption rather than committing to a full plant redesign. For OEMs and equipment integrators, EIC licenses the design — allowing a manufacturer to bring a materially more efficient product to market under its own brand.
Resources
Written for engineers and developers evaluating this application. We ask who you are before sending the file.
- Download the PDF — Compression for Industrial Refrigeration, 205 KB
Compression for Industrial Refrigeration
Near-isothermal compression applied to refrigerants: where the energy goes in a refrigeration cycle, recovering work on the expansion side, and the cold-storage, HVAC, data center and liquefaction use cases.
PDF · 205 KB
Other applications
-
xLDES Extra long duration energy storage
Turn intermittent solar and wind into firm, round-the-clock power. Avoid curtailment and expensive peakers. Generate power at the point of use to avoid congestion and buildout cost. Dampen grid fluctuations with deep banks of storage.
-
High pressure industrial gas compression
Cut the compression energy that makes banking of fuel gases expensive and space consuming. Cut downtime and maintenance costs. Maximize multiple energy source flexibility at data centers. Recover compression energy from stored gas and pipeline during letdown. Stop worrying about oil contamination.
-
CO₂ Capture & Liquefaction
Economically capture carbon from flue gas with as low as 15% CO₂. Valorize the offtake to cover capex. Compress and liquefy CO₂ economically and with less equipment risk.