For pipelines, chemical process plants, biogas producers, efuels
High pressure industrial gas compression
Cut the compression energy that makes banking of fuel gases expensive and space consuming. Cut downtime and maintenance costs. Maximize multiple energy source flexibility at data centers. Recover compression energy from stored gas and pipeline during letdown. Stop worrying about oil contamination.
Lower
parasitic load per kilogram
Higher
energy source capacity factor
Reduced
cost of high density storage
The problem
Compression is the step almost every gas application has in common, and it is where the energy goes. Hydrogen has to be compressed to be stored, moved or fed to a Haber-Bosch loop. Natural gas has to be compressed to be stored at a density worth storing. Syngas has to be compressed before it is useful downstream. In each case the compressor is a continuously running electrical load, and conventional machines waste a large part of that energy as heat.
The demand side has shifted too. Distributed and behind-the-meter generation — driven by data center power needs and by the search for energy independence — has made on-site gas handling and buffering a live problem for operators who never had to think about it before.
What EIC does differently
The liquid piston platform compresses near-isothermally: the heat of compression is carried away in real time as it is created, so more of the input energy goes into raising pressure rather than into heat that has to be dumped afterwards. Conventional machines can only approximate this with intercoolers between stages, by which point the heat has already done its damage.
Across gases, pressures and flow rates our modeling shows a 10–35% reduction in compression energy against conventional equipment; on natural gas compressed to 300 bar it is 20–30%, and on the fuel gas duties covered here 20–30%. Maintenance cost is lower as well.
Where it applies
- Hydrogen — compression for storage, refueling, transport, and feeding Haber-Bosch
- Natural gas — compression for storage and transport
- Bio-derived fuel gases — storage, pipeline injection and upgrading
- Syngas — compression for Fischer-Tropsch, for storage and transport, and hydrolysis for purification
- CO₂ — compression for separation, sequestration and resale
- Refrigeration — data center and cold storage duty
Buffer storage: a worked example
Natural gas buffer storage brings the compression and the storage problems together. Storing gas at 300 bar raises its density, which cuts the container volume and the cost per kilogram of gas held — and EIC provides that compression at roughly 30% lower energy than conventional equipment.
Whether a site is served by a physical pipeline or a virtual one, buffer stock is what keeps it running. Once a pipeline is in place, the same compression equipment and storage tanks can be filled during low-demand hours and drawn down when demand spikes outrun pipeline capacity — daily peak shaving, weather and price events, and backup power. That is a question behind-the-meter generators and utilities are both asking now.
EIC has partnered with a gas vessel manufacturer to pair efficient compression with low-cost high-pressure storage.
Deployment
The platform is built from variations of common hydromechanical and electric equipment, and integrates with commercially available Balance of Plant. EIC’s deployment model is to work through EPCs and other capable installers to put modular plants on site.
Resources
Written for engineers and developers evaluating this application. We ask who you are before sending the file.
- Download the PDF — Fuel Gas Energy Storage, 933 KB
Fuel Gas Energy Storage
Near-isothermal compression for natural gas, hydrogen and bio-derived fuel gases, the case for buffer storage behind the meter, and the subsurface options when the volumes get large — depleted gas fields, aquifers, salt beds and excavated hard rock.
PDF · 933 KB
Other applications
-
xLDES Extra long duration energy storage
Turn intermittent solar and wind into firm, round-the-clock power. Avoid curtailment and expensive peakers. Generate power at the point of use to avoid congestion and buildout cost. Dampen grid fluctuations with deep banks of storage.
-
HVAC & Refrigeration
Cut compression and cooling energy in food storage and data centers
-
CO₂ Capture & Liquefaction
Economically capture carbon from flue gas with as low as 15% CO₂. Valorize the offtake to cover capex. Compress and liquefy CO₂ economically and with less equipment risk.